Sampling at 180 litres per minute

Bioaerosol samplers are vital equipment for use in bioaerosol research, clean rooms, pharmaceutical validation, food production and packaging, indoor air quality, HVAC and throughout hospitals and healthcare settings, wherever air hygiene is vital. The MicroBio MB2-HiFlow Bioaerosol Sampler has all the features of the tried and trusted MicroBio MB2 model, but with the added advantage of sampling at a rate of 180 litres per minute, nearly halving the time to take a sample. The time to sample a cubic meter of air is reduced from 10 minutes to 6 minutes.

Download the white paper about the economic advantages of using the MB2-HiFlow sampler.

Trusted economical sampling

The MicroBio MB2-HiFlow uses standard 90 mm Petri dishes and a 400 x 1.0mm hole stainless steel sampling head, avoiding the expense of proprietary sampling media. Using standard readily available consumables, at low cost with a variety of media, makes the MicroBio MB2-HiFlow an economical instrument to use. In use worldwide, the MicroBio MB2-HiFlow bioaerosol sampler is an invaluable device to help meet a wide range of compliance standards.

Specification

Supplied with the MB2-HiFlow Bioaerosol Sampler

• 400 x 1.0 mm hard-anodised aluminium sampling head

• Operating manual
• Hard back padded carry case
• Mini table-top tripod
• Multi-voltage worldwide charger with UK, Euro, USA, Australia and 12V in-car plugs and pre-charged cells so the MB2-HiFlow is ready to use out of the box
• Optional medical grade mains power supply
• Certificate of Calibration

Το άρθρο MicroBio MB2-HiFlow Bioaerosol Sampler εμφανίστηκε πρώτα στο Medisareurope Είδη προστασίας.

The MicroBio MB1 bioaerosol sampler is the simplest to use and most economical microbial air sampler of its kind.  It has been fully validated and thousands of units have sold worldwide.

The Affordable Microbial Air Sampler

The MicroBio MB1 bioaerosol sampler is capable of using both a 90 mm Petri Dish or 55 mm contact plates with 220 and 400 hole sampling head option. Using standard readily available consumables at low cost with a variety of media makes the MicroBio MB1 an economical instrument to use. The MicroBio MB1 bioaerosol sampler is an invaluable device for use in food and packaging quality assurance, indoor air quality and education.

Watch the MB1 being used on BBC TV ‘The One Show’

Supplied with the MB1 Bioaerosol Sampler

Petri dish and contact plate spring sets

Stainless Steel Sampling head

Printed operating manual

Padded carry bag

Multi-voltage world-wide charger with international plugs and 12V in-car plug

Ansmann maxE NiMH cells – pre-charged so the MB1 is ready to use out of the box

Certificate of Calibration

Το άρθρο MicroBio MB1 Bioaerosol Sampler εμφανίστηκε πρώτα στο Medisareurope Είδη προστασίας.

MicroBio MB2 Bioaerosol Sampler

Bioaerosol samplers are vital equipment for us in bioaerosol research, clean rooms, pharmaceutical validation and throughout hospitals wherever air hygiene is vital. The MicroBio MB2 Bioaerosol Sampler has a host of features making it ideal for use in such applications. It has been fully validated and thousands of units are in use worldwide.

Now with Sequential Sampling and multi-lingual menu system.

The MicroBio MB2 bioaerosol sampler is capable of using both standard 90 mm Petri dishes or 55 mm contact plates with 220 and 400 hole sampling head option, avoiding the expense of proprietary sampling media. Using standard readily available consumables at low cost with a variety of media makes the MicroBio MB2 an economical instrument to use. The MicroBio MB2 bioaerosol sampler is an invaluable device designed for use in hospitals, with IAQ consultants and validating clean rooms to ISO 14698 requirements and USP797 Guidelines in the United States.

Specification

Supplied with the MB2 Bioaerosol Sampler

• Petri dish and contact plate spring sets
• 220 hole x 1 mm stainless steel or400 x 0.7 mm anodised aluminium sampling head
• Printed operating manual
• Padded carry bag
• Mini table-top tripod
• Multi-voltage world-wide charger with UK, Euro, USA, Australia and 12V in-car plugs and
  pre-charged cells so the MB2 is ready to use out of the box
• Certificate of Calibration

·

·         Sampling Head Option

• The MicroBio MB2 can be purchased with the option of one of two types of sampling heads.  The MicroBio MB2 will be calibrated for use with the selected head.  If swapping to another head type, the MicroBio MB2 must be re-calibrated.

·         220 x 1 mm hole stainless steel head

• This is the standard head sold with the MicroBio MB2 and MB1 air samplers.  It is designed as a dual purpose head for both 55/60mm contact plates or up to 90mm Petri dishes.  The d50 cut-off point os 1.7 um and has a jet velocity of 9.63 m/s.  It is the ideal head for general purpose sampling in air quality and food production.
• MicroBio 220 Hole Sampling Head

·         400 x 0.7 mm hole anodised aluminium head

• Available as a no-cost option, this head provides full coverage of 90mm Petri dishes with a d50 point of 1.35 um and air jet velocity of 10.7 m/s.  These heads are ideal for use in areas needed higher sensitivity of collection.
• MicroBio 400 Hole Sampling Head

·         Tripod  (Part No. A-00061)  –  NOW INCLUDED AS STANDARD!

• Aluminium indoor table-top tripod for use with MicroBio MB2. This tripod enables the MB2 to stand on its own with a height range of 145 to 245 mm (to base of MB2).
• MicroBio Mini Tripod

·         Head Retaining Spring  (Part No. A-00028)

• Replacement sampling head retaining spring.  Sold individually
• Head Retaining Spring

·         Contact Plate Holding Springs  (Part No. A-00068)

• Replacement springs used to hold 55 mm contact plates.  Sold in a pack of 3.
• Contact Plate Springs

·         Petri Dish Retaining Springs  (Part No. A-00070)

• Replacement springs used to hold 90 mm Petri dish plates.  Sold in a pack of 3.
• MicroBio Petri Dish Springs

·         Spring Retaining Screws  (Part No. A-000254)

• Replacement stainless steel M3 x 6 screws used to fasten the dish, plate and head retaining springs.  Sold in a pack of 10.
• MicroBio Head Screws

For full specification details, visit our MicroBio MB2-HiFlow product page or contact :

MEDISAR EUROPE Ltd

Tel.   +359 8898 23747 (BG)

Mob. +30 6977349726 (GR)

E mail: info@medisareurope.com

disar@otenet.gr

Το άρθρο MB AIR SAMPLERS εμφανίστηκε πρώτα στο Medisareurope Είδη προστασίας.